에이치엔엔지니어링(HN Engineering)

PRODUCTS

Designed for minimum maintenance
Smooth and Easy Operation.
Balancing Type : Torsion Spring Balance or Spring Cylinder
Loading arm fully balanced in all positions while empty
Seals available in NBR, HNBR, EPDM, PTFE or other specific materials
Loading Valve : T/T only or Equivalent one if need
Remote Control Unit consists of an arm clamp, handle and connection rod, if need
½" Vacuum Breaker for quick drainage after closure of loading valve, if need
Custom-made to the client’s specifications.

Applied Light Oil and Heavy Oil Products.
Designing upto 26,000 Liters of Tank Lorry.
Loading Arm has Flanges which can be connected with
Bolts & Nuts in order to handle easily.
Balancing Type is designed as Torsion Spring Balance.
The Materials of Swivel Joints are Carbon Steel, Ductile
Iron and Aluminum etc.
The Standards of Materials are displayed on the Modeling
of Loading Arm.
Special Materials can be also applied upon Client's Request.
Deflector can be used upon the Client's Request.
The Type of Drop Tube in Heavy Oil is short in Length, and
applied an Angle of 45 Degrees on the end part.
Sized from 2" to 4" or Custom-made.

Applied Light Oil and Heavy Oil Products.
Designing upto 36,000 Liters of Tank Lorry.
Loading Arm has Flanges which can be connected with
Bolts & Nuts in order to handle easily.
Balancing Type is designed as Torsion Spring Balance
The Materials of Swivel Joints are Carbon Steel, Ductile
Iron and Aluminum etc.
The Standards of Materials are displayed on the Modeling
of Loading Arm.
Special Materials can be also applied upon Client's Request.
Deflector can be used upon the Client's Request.
The Type of Drop Tube in Heavy Oil is short in Length, and
applied an Angle of 45 Degrees on the end part.
Loading Arm can be operated in a Long Reach because of
Boom Assembly.
Sized from 2" to 4" or Custom-made.

Applied Light Oil and Heavy Oil Products.
Designing upto 36,000 Liters of Tank Lorry.
Loading Arm has Flanges which can be connected with
Bolts & Nuts in order to handle easily.
Balancing Type is designed as Torsion Spring Balance.
The Materials of Swivel Joints are Carbon Steel, Ductile
Iron and Aluminum etc.
The Standards of Materials are displayed on the Modeling
of Loading Arm.
Special Materials can be also applied upon Client's Request.
Deflector can be used upon the Client's Request.
The Type of Drop Tube in Heavy Oil is short in Length, and
applied an Angle of 45 Degrees on the end part.
Loading Arm can be operated in a Long Reach because of
Boom Assembly.
Sized from 2" to 4" or Custom-made.

Applied Hydrochloric Acid(HCL) and Sulfuric Acid(H2SO4)
Products.
Loading Arm has Flanges which can be connected with
Bolts & Nuts in order to handle easily.
Balancing Type is designed as Spring Cylinder Balance.
The Materials of Swivel Joints, Pipes and Fittings are
Carbon Steel and PTFE or ETFE Lined.
The Standards of Materials are displayed on the Modeling
of Loading Arm.
Special Materials can be also applied upon Client's Request.
The Hopper(Seal Hood) shall be applied on the Drop Tube.
The Materials of Hopper shall be FRP, Aluminum or
Stainless Steel.
Loading Arm can be operated even in a Long Reach.
Sized from 2" to 4" or Custom-made.

Applied Aggressive Chemicals and Acids Products.
This Model is applied as one body excluded from some
flanges in TLA-T1300 TYPE.
Loading Arm has Flanges which can be connected with
Bolts & Nuts in order to handle easily.
Balancing Type is designed as Spring Cylinder Balance.
The Materials of Swivel Joints, Pipes and Fittings are
Stainless Steel 304 or 316 in order to protect the corrosion.
The Standards of Materials are displayed on the Modeling
of Loading Arm.
Special Materials can be also applied upon Client's Request.
The Materials of Hopper shall be FRP, Aluminum or
Stainless Steel.
Loading Arm can be operated even in a Long Reach.
Sized from 2" to 4" or Custom-made.

Applied Aggressive Chemicals and Acids Products.
This Model is applied as Quick Coupling on the end part
without Seal Hood in TLA-T1500 TYPE.
Loading Arm has Flanges which can be connected with
Bolts & Nuts in order to handle easily.
Balancing Type is designed as Spring Cylinder Balance.
The Materials of Swivel Joints, Pipes and Fittings are
Stainless Steel 304 or 316 in order to protect the corrosion.
The Standards of Materials are displayed on the Modeling
of Loading Arm.
Special Materials can be also applied upon Client's Request.
The Materials of Hopper shall be FRP, Aluminum or
Stainless Steel.
Loading Arm can be operated even in a Long Reach.
Sized from 2" to 4" or Custom-made.

Applied Asphalt and Sulfur Products.
This Model is designed as Jacketed Type i.e. Inside Pipe
Lines carry the Products and the Steam flows Outside
Pipe Lines to maintain the constant temperature.
Loading Arm has Flanges which can be connected with
Bolts & Nuts in order to handle easily.
Balancing Type is designed as Air Cylinder and/or
Counterweights.
The Materials of Swivel Joints, Pipes and Fittings are
Carbon Steel and etc.
The Standards of Materials are displayed on the Modeling
of Loading Arm.
Special Materials can be also applied upon Client's Request.
Protecting System of eliminating the VOC and etc.
Sized from 2" to 6" or Custom-made.

Applied Asphalt and Sulfur Products.
This Model is designed as Jacketed Type i.e. Inside Pipe
Lines carry the Products and VOC Protecting System in
TLA-J4000 TYPE.
Loading Arm has Flanges which can be connected with
Bolts & Nuts in order to handle easily.
Balancing Type is designed as Air Cylinder and/or
Counterweights.
The Materials of Swivel Joints, Pipes and Fittings are
Carbon Steel and etc.
The Standards of Materials are displayed on the Modeling
of Loading Arm.
Special Materials can be also applied upon Client's Request.
Protecting System of eliminating the VOC and etc.
Sized from 3" to 6" or Custom-made.